They drilled for the trimming valve to be installed.

A picture is worth a thousand words, and here you have it.

The fire pit below is going to be installed in Sacramento on 11 14 09 for the Yard Crashers/ DIY/ HGTV show. After it is and has been installed we will post pictures on the Yard Crashers page. In the mean time here is the how to and why. We can build any size, shape, design feature you desire. We build to your imagination. Below is the catch basin to hold the water for the feature. Above you see the auto fill? Below the water pump is now install below.

Below the stainless steel ring is installed. Below the glass (Bronze Base Glass) has been installed and the lights turned on.  Below you can see the pump has been turned on.

And now the fire.  We placed a card board template to replicate the table top to conceal the lights as well.

Now we add color to the water!

Here is the feature exposed with the blue water. You can change the water to any color you like.  This feature is only 6 1/2" tall. You can mount this under the table top and keep it only an inch or so above the surface of the table top.  This feature is only 6 1/2" tall. You can mount this under the table top and keep it only an inch or so above the surface of the table top.

So let's change it to red water and add Starfire Base Glass.

Remember, we build to your imagination!

The Fire Table below was installed in Sacramento California by and for Yard Crashers. The finished pictures will be posted on the Yard Crashers page when this project is installed after 01 20 10. This episode was to be labeled "Outdoor Shower" on HGTV and the DIY  Network but somehow it was labeled "Modern Fire Wall" go figure? It is episode 302 on HGTV or DIY  Network. The details will be shown on the DIY page when and as soon as we receive them from the producers. We built a square aluminum pan with an 18" double stainless steel ring and used one of our FPPK kits for the propane fuel. This will be shown on the episode coverage as well. Here are the pictures of the back yard and the finished fire table using propane.

The fire pit below was built to the customers specs. It was 48" round, 10" tall with 8" legs and constructed from 1/4" aluminum. Then powder coated to match the customers request. The center leg was for the gas and electrical for the electronic ignition.